- This topic has 0 replies, 1 voice, and was last updated 19 years ago by
.
-
Posts
-
Elo Flatscreen P274-LCD-01-S
Last edited: December 15, 2003 08:08 AM
This monitor is also distributed by CTX as the PanoView 630. It is an 800×600 LCD active matrix 12″ resistive touchscreen. It is currently used only for Touch Menus Windows95 applications such as FasTouch, as the DOS 640×480 screens will appear vertically compressed.
InstallationElo touch drivers need to be installed for use with this monitor. Start by downloading the self-extracting zip [color=red:35cipcoe][u:35cipcoe][b:35cipcoe]mm95_200.exe[/b:35cipcoe][/u:35cipcoe][/color:35cipcoe][/url:35cipcoe] into a temporary directory. When run it will install into a directory called Elowin95. From that directory, run Setup. Select Elo 2310 on Com1 when prompted to select a type. Upon completion of the setup you will be required to restart your computer, after which the calibration program will run automatically.
CalibrationCalibration is run from the Elo icon within Control Panel as follows:
1. From the Start menu, select Settings.
2. Select Control Panel.
3. Select the Elo Touchscreens icon.
4. Select the Calibrate button in the middle of the window.
5. Touch the three points as prompted.
6. Select Yes to accept the calibration. Alternatively, select No to recalibrate it.
7. Select OK to close the window.Power
Power is supplied by an adapter such as the UP0252A-01P by UMEC. It provides up to 3A for 5VDC and 1.5A for 12VD
- You must be logged in to reply to this topic.