Hewitt Rand Jumperless AE200-JL Network Card
Last edited: December 15, 2003 08:08 AM

This card should be set to work with the WD8003 Lantastic Driver on IRQ 5

Workstations

        Put the AUTOSET.EXE on the bootdisk in the root directory.
        Add the following line to the AUTOEXEC.BAT:
       

AUTOSET NO=1 *INF=RJ45 MODE=MEMORY IOBASE=0x280 IRQ=5 ROMSIZE=DISABLE RAMBASE=0xD000

        *INF= can be set to either RJ45 or BNC depending on the network you are using.  (BNC – CoAxial)

Servers

          Put the AUTOSET.EXE in the TOOLS directory in the path. Add the following line to the AUTOEXEC.BAT:
       

AUTOSET NO=1 *INF=RJ45 MODE=MEMORY IOBASE=0x280 IRQ=5 ROMSIZE=DISABLE RAMBASE=0xD000

        *INF= can be set to either RJ45 or BNC depending on the network you are using.  (BNC – CoAxial)