Telcomp Telephone Line Caller ID Interface TC-1082

Last edited: December 15, 2003 08:18 AM

The Telcomp Interface connects to up to 8 telephone lines and extracts the Caller ID information embedded between the first and second rings. It connects to a PC via a serial port.  The PICKUPS program then reads that information and places it in a file for access by software.
PC Cable

TC-1082        Computer
RS232 OUT        COM2
DB9 Male      DB25 Female

---

   

---

    2 — TX  — 3
    3 — RX  — 2
    5 — GRD — 7
    6 — DTR — 5
    7 — CTS — 20
    8 — RTS — 6
Javelin Cable

TC-1082          Javelin
RS232 OUT        COM Port
DB9 Male          RJ45

---

  2 — TXD —- 2
  3 — RXD —- 3
  5 — DTR —- 5
  7 — CTS —- 4
  6 — DSR —- 6
Immage Cable

TC-1082          Immage
RS232 OUT        COM Port
DB9 Male        RJ45

---

  2

---

TX

---

5
  3

---

RX

---

3
  5

---

GRD

---

2 (COULD ALSO USE 7)
  6

---

DTR

---

6 (DSR)
  7

---

CTS

---

4 (DTR)

Remove outside 2 wires on RJ45 or cable as the Immage unit puts voltage on these wires. If using a standard straight through cable into a DB-9 adapter the color sequence is as follows; 2-black, 3-green, 5-orange,6-yellow, 7-red.
Switches

Switch Bank 1 – all switches off(down)

Switch Bank 2 – 3 on(up)
                all other switches off(down)
Related Documents

[color=red:2w6rh0sq][u:2w6rh0sq][b:2w6rh0sq]CallerID[/b:2w6rh0sq][/u:2w6rh0sq][/color:2w6rh0sq][/url:2w6rh0sq]

[color=red:2w6rh0sq][u:2w6rh0sq][b:2w6rh0sq]Styling CallerID[/b:2w6rh0sq][/u:2w6rh0sq][/color:2w6rh0sq][/url:2w6rh0sq]

Revisions

6/6/96

  1. Added Javelin cable specification