Credit Card

This tab of the Options screen lets you set options related to the Credit Card platform and Processing Network.

Platform

Win-EZ Payment Server can use it's own internal platform "Direct Interface" to communicate with several Networks, along with the external NETePay platform. Select the appropriate option. Note that some options will require an additional license.

Network

Select the processing network that you are using to process credit cards. Note that for NETePay platforms other than Serling and Mercury, the platform is determined by the version of NETePay that is installed.

Once you select the Platform and Network, the network programming options will show up in the space below. Most of the settings required to run these networks are provided by the merchant account provider.

NETePay:

For Mercury and Sterling a Merchant ID is required, and will be provided with your merchant account.

The Servers list on the right hand side will be populated with the most popular servers, but you can change or add more servers if your provider suggests them.

For the Other NETePay option, the server address should be 127.0.0.1, unless NETePay is installed on another machine on the network. In which case that address should be used. Only one address should be used with this option.

If you have NETePay setup to use a password, you will need to provide it here.

Direct Interface First Data:

This interface is to the FDMS Cardnet platform. Your merchant provider will supply the Merchant ID and Terminal ID. Please have the software set to /nsoftware Ibiz, as this is the component used to connect to the Datawire network. Once a MID and TID have been entered, you must register the Datawire ID. Once the ID is registered it is important that you write this ID down so that you can restore it if you ever loose the settings.

Also note that the batch will be split into pieces based on the "Max transactions per batch part" setting. The default of 100 should be sufficient for most clients. If you have a very slow, or unstable internet connection you may need to lower it. You will receive errors during batch if this is an issue.

Direct Interface TSys / Vital:

All of the settings here will be provide with your merchant account.