Barcode Blaster Printer

Home Forums Knowledge Base Hardware Legacy Hardware Barcode Blaster Printer

  • This topic has 0 replies, 1 voice, and was last updated 19 years ago by Rob.
Viewing 1 post (of 1 total)
  • Author
    Posts
  • #1491
    Rob
    Member

    Barcode Blaster Printer
    (Barcode Blaster LS by Cognitive Solutions, Inc.)
    (Model # BD422002-001)

    Last edited: December 15, 2003 07:44 AM

    This is a direct thermal Bar Code Printer. It is currently supported only for printing labels, not barcodes. It needs special commands to perform any printing. The module called Blaster.EXE will incorporte any and all support for this printer.
    Specifications

    Dot density: 203dpi or 101dpi (user selectable)

    Paper width: 4.25″

    Maximum print width: 4.10″

    Maximum print length: 6″ at 203 dpi or 24″ at 101 dpi

    Print speed: 2.5 inches per second maximum

    Installed RAM: 128K standard, 256 optional

                *              122K – image buffer
                *              4K – text buffer

    Media types: direct thermal paper or vinyl, visible light and infrared scannable label and tag stock, butt cut or die cut, with various adhesives.

    Interface: RS-232 serial and /or Centronics parallel.

    Serial port parameters:

                *              Baud rates: 600,1200,2400,4800,9600,19200
                *              Parity: Odd, Even or None
                *              Data bits: 7 or 8
                *              Stop bits: 1 or 2
                *              Handshaking: RTS/CTS or XON/XOFF
                *              Connector: DB9 female on rear panel

            Acceptable combinations of above parameters:

            N,8,1 or N,8,2 or O,7,1 or O,8,1 or E,7,1 or E,8,1

    Electical requirements: UL (U.S.A) and CSA (Canada) approved models – AC power transformer electrical input 115 VAC, 60 Hz, 80 watts average while printing, output 19.6 VAC.
    Cables

    RJ45 Javelin 2 connection

    DB9 female printer connection
    RxD (Orange) 2 -> -> -> 3 TxD
    TxD (Black) 3 -> -> -> 2 RxD
    Ground (Green) 5 -> -> -> 5 Ground
    DTR (Brown) 4 -> -> -> 8 CTS
    CTS(White) 8 -> -> -> 7 RTS
    DSR 6 -> -> -> 7 RTS
    Associated documents

    [color=red:1wxphlsu][u:1wxphlsu][b:1wxphlsu]Bar Code Blaster Interface Document[/b:1wxphlsu][/u:1wxphlsu][/color:1wxphlsu][/url:1wxphlsu]

    Revisions

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.