Cat 100 Specifications

Last edited: December 15, 2003 08:07 AM

Hardware Requirements

1. 266 MHz processor or higher
2. 32 mega bytes of ram
3. CTX PanoView630 12.1″ Touchscreen
4. Knowell KW-524J(H) 2 serial/2 parallel add-on card
    a. Com1 uses IRQ4 and is reserved for touch
    b. Com2 uses IRQ3 and is reserved for the Ardac Bill Acceptor
    c. Com3 uses IRQ9 and is reserved for the AMC Mag Card Reader
    d. Com4 uses IRQ3 and is not used
    e. Lpt1 uses IRQ7 I/O 03BC-03BE, I/O 7BC-7BE, and is reserved for the Fijitsu Printer
    f.  Lpt2 uses the settings 0378-037A and is not used
    g. Lpt3 uses the settings 0278-027A and is not used
5. Ardac Bill Acceptor
6. Amc Mag card reader
7. Fijitsu Printer
8. Ups
9. Power strip
10. Net card
Network Requirements

1. From the desktop Right Click on the network neighborhood icon
2. Select properties
3. Select the Configuration Tab
    a. Remove all of the network components except for the network adapter
    b. To remove components
        1. Click on the component to be removed to highlight it
        2. Click on the remove button
4. These network components need to be installed
    a. Choose add
    b. Select client
    c. Manufacturer Microsoft
    d. Client for Microsoft Networks
    e. Choose add
    f. Select protocol
    g. Manufacturer Microsoft
    h. NetBEUI
    i. Choose add
    j. Select service
    k. Manufacturer Microsoft
    l. File and printer sharing for Microsoft Networks
5. You should now have only these protocols installed
    a. NetBEUI
    b. File and printer sharing for Microsoft Networks
    c. Client for Microsoft Networks
    d. Netcard
6. Select the Identifacation Tab
    a. Computer Name=Cat##### where ##### is the TMCU Touch Menus Id number
    b. Workgroup= Showbooth or ?
    c. Computer Description=Touch Menus Cat#### or ?
7. Click on the OK button at the bottem of the screen. You will see this message on the computer “You must restart your computer before the new settings will take effect.”  “Do you want to restart your computer now?”
8. Select YES.  When it reboots login as you normally would.
9. Double click on the My Computer Icon
10. Highlight youre C drive
11. Right click on it and choose Sharring
12. Click on the Sharing Tab
    a. Select Shared As:
    b. Share Name=C
    c. Select Access Type= Full
Software Requirements

Fastouch
Fastouch application theme
Standard Policies
  1. Support should not have any password if it is going to be for a show